G4 Hydrocyclone DW

Linatex Hydrocyclone G4 DW is applied to dewatering and desliming mineral sands, concrete sands, iron sands, iron ore fines, phosphate rock and coal washery fines in mineral processing circuits, including back-fill feed preparation.

An extended overflow pipe induces a siphon effect which in turn creates a vacuum. This vacuum holds the discharge regulator closed trapping the majority of the water, silts and clays. When the weight of solids inside are sufficient to overcome the vacuum the discharge regulator is forced open and allows discharge of the solids.

The key to the success of the Linatex Hydrocyclone G4 DW lies in the discharge regulator which is fitted below the spigot on the underflow. When feed is introduced into the Linatex Hydrocyclone G4 DW, the coarser solids report to the spigot where the density and discharge rate of the solids are controlled by the underflow regulator.

  G4 Hydrocyclone DW Spec Sheet